Grid View:

SucceX 2-8S PDB w/ 5V/12V BEC

The Succex Power distribution board is designed for high voltage and high current applications. It consists of 2+2+3+3 layers of heavy copper to sustain maximum current demand. This PDB can sustain up to a maximum total 330A. Also features 12V 3Amp and 5V 3Amp regulators with a maximum of 8S (36V) input. In addition, it can also collect the si..


Micro 2-8S BEC - 5V/12V Output

The iFlight Micro BEC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 36V to a low output stable voltage, which makes it ideal for step-down voltage applications.It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (5..


Replacement Rotor Bell for XING 2206 2207 2208 2306

This is a replacement motor bell for XING Series Motors. The iFlight XING series motor is designed and named by FPV pilot & specialist Patrick Xing. Combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise, a top-of-the-line motor has been produced. iFlight XING provides the most incredible power and ..


SucceX Micro F4 V1.5 12A 2-4S Flight Tower System (MPU6000)

SucceX F4 Flight Controller (V1.5)-STM32F411-Input voltage 2-4S LIPO-Gyro: MPU6000-2x UART ports-4x motor outputs-Betaflight OSD :YES-Blackbox FLASH: 8MB-BEC 5V 2.5A cont.-Size: 21mm*21mm-Mounting holes distance: 16*16mm-Weight: 2.5g-Firmware :IFLIGHT_F411_PROSucceX Micro 12A 4-in-1 ESC(w/plug)-Firmware: G-H-30 BLS 16.7 -BLHeliSuite: http..


HQ 65mm 3-blades Propellers CW CWW (3sets/6pairs)

Propeller Diameter: 65MM       Pitch : 1.5                               Blades : 2       Material : Poly Carbonate           Weight :0.8gHub Diameter : 9.8mm           H..


5.8G SucceX Mini 500mW VTX (M3)

5.8G SucceX Mini 500mW VTX SPECS-Input voltage: 5V-48 standard channels, A/B/E/F/R Band-Output Power: pit/20/100/200/400/500mW-BEC Output: 5V for Camera or FC-RF Connector: MMCX-Video Format: NTSC/PAL-Size: 26*26mm /20*20mm φ3 mounting- Protocol port: IRC TrampPackage included: 1pc x 5.8G SucceX Mini 500mW VTX ..


BumbleBee Ducts 25mm Height (EVA Sponge is optional)

PLA+ Material , more durable.Color: yellowDuct and EVA Sponge Height: 25mmFit for BumbleBee / BumbleBee V1.3 and BumbleBee HD V1Special designed EVA Sponge for BumbleBee V1, easy to assemble and the DJI Air Unit directly.Package included: 1set x BumbleBee Ducts (EVA Sponge is optional)..


BumbleBee HD Type C 90° Connector

BumbleBee HD Type C 90° Connector SPECIFICATIONSType C to Type C INCLUDES1pcs x BumbleBee HD Type C 90° Connector ..


BumbleBee TBS 915 Antenna Mount Seat(1pc)

BumbleBee TBS 915 Antenna Mount Seat(1pc)Material: TPUColor: yellowFit for BumbleBee frameIt is soft, durable and easy to assemble , will fix the antenna well.Package included:1pc x TPU 915 Antenna Seat Only!..


BumbleBee TPU Antenna Mount Seat

It is higher quality TPU material to print the Antenna mount, easy to assemble and better to fix and protect the antenna.Color: YellowFit for BumbleBee CineWhoop framePackage included:1pc x TPU Antenna Seat only..


BumbleBee TPU Camera Mount (2sets)

BumbleBee TPU Camera Mount (2sets)Color: yellowEasy mount and fix the camera.Package included:2sets x TPU Camera Mounts only...


BumbleBee TPU Front and Back Bumpers (1set)

It is the highest TPU 3D printed Bumpers, better to protect your camera from scratchingColor: yellowPackage included:1set x Bumpers only!NOTE: Camera and other parts do not include...


BumbleBee TPU Landing Pads (1set)

BumbleBee TPU Landing Pads (1set)Main features:- Color: yellow- Durable, soft , light and flexible- Taking out a lot of the impact out of the quad from landing- Allow for landing on different surfaces to protect the frame from scratching your drone.- Making a smoother transition from flight to a firm landing on the ground.  Pack..


Caddx Vista Special Combo w/ DJI Digital HD FPV Goggles

Caddx has worked with DJI to release a new generation of digital HD FPV transmitters. The Vista was fully authorized by DJI and is compatible with their HD FPV System. Even better, the Caddx Vista was engineered to be lighter and smaller than the DJI Air Unit Module and also comes with 20x20 hole pattern for easier installation onto smaller qu..


CineBee 4K Camera TPU Mount (1set)

CineBee 4K Camera TPU Mount (1set)Color: blackFit for CineBee 4K only.Package included:1set x TPU camera mount ..


DC3 TBS 915 TPU Antenna Mount Adapter (2sets)

DC3 TBS 915 TPU Antenna Mount Adapter (2sets)TPU Antenna Mount Adapter for the Crossfire Nano RXColor: blackPackage included:4pcs x TPU Antenna Mount AdaptersNOTE: it fits for DC3 Drones...

Showing 97 to 112 of 199 (13 Pages)