BLITZ Series

Specification:- Supports: DShot150/300/600/MultiShot/ OneShot etc.- Mounting Holes: 30.5*30.5mm/Φ4mm- Supports 2-6S lipo input- Telemetry Output: NO- Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)- Current sensor: Yes- Constant: 45 Amps - Current rate: 200- Burst: 55 Amps- Weight: 14.7g- MCU: BB21- BEC: NOPack..

Specification:- Mounting Holes: 30.5*30.5mm/Φ4mm- Weight: 15.3g- Supports 2-6S lipo input- MCU：G071- Constant: 55 Amps - Burst: 65 Amps- Current sensor: Yes- BEC: No- Current rate: 200- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.- Target:   IFLIGHT_BLITZ_G2Package Included:- BLITZ E55S 4-IN-1 2-6S ESC..

TOP FEATURES:Support BLHeliSuite programmableBuilt in 2.4G CC2500 Receiver5A continuous currentSuper light only 4.8gMCU：STM32F411Power supply: 1SGyro: BMI270FC // BLITZ F411 1S 5A Whoop AIO Board Weight: 4.8g (with power cable, VTX, and VTX antenna)Mounting pattern: 25.5*25.5mm/φ3mm （half-hole)Supported Protocols: CC2500, S..

FC // BLITZ F7 V1,1 Flight ControllerTop Features:- Improved circuit design, better components and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debugging- With LC filterSpecifications:MCU: STM32 F722Gyro: BMI270Barometer: DPS310OSD Chip: AT7456EFlash: 32MB (Blackbox flash)U..

FC // BLITZ F7 V1,1 Flight ControllerTop Features:- Improved circuit design, better components and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debugging- With LC filterChangelog:- 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price i..

Specification:- Dimension: 35*42mm- Mounting Holes: 20*20mm/Φ4mm- Weight: 11.3g- Supports 2-6S lipo input- MCU：G071- Constant: 55 Amps - Burst: 60 Amps- Current sensor: Yes- BEC: No- Current rate: 100- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.- Firmware: BLHeli 32- Target:   IFLIGHT_BLITZ_G2Pac..

Specification:- Dimension: 35*42mm- Mounting Holes: 20*20mm/Φ4mm- Weight: 10.4g- Supports 2-6S lipo input- MCU：BB21- Constant: 55 Amps - Burst: 60 Amps- Current sensor: Yes- BEC: No- Current rate: 100- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.- Target:  Q-H-50 16.7 (BlheliS) / Bluejay Q-H-50 (Blueja..

FC // BLITZ Mini F4 Flight ControllerTop Features:- Improved circuit design, better components and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debuggingSpecs:- MCU：STM32F405- Gyro：MPU6000- Baro: NO- Betaflight OSD: IFLIGHT OSD （AT7456E)- Blackbox: 16MB- UARTS: 6- I2C ..

FC // BLITZ Mini F7 V1.1 Flight ControllerTop Features:- Improved circuit design, better components and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debuggingChangelog:- 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with ..

What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whoop size board? That would be crazy right? Well, we just did it...This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware dev..

Top Features:- Improved circuit design, better components, and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debugging- 512MB BlackBox- With LC filterSpecifications:Mount pattern: 35*35mm/ 4mm PCB hole diameterSmartaudio / IRC Tramp VTX protocol supportedFirmware target:&nbs..

Top Features:- Improved circuit design, better components and lower electrical noise!- DJI HD VTX Connector (Plug-and-Play / No soldering required)- FC indicator LEDs for visual debugging- With LC filterChangelog:- 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000.Specifications:MCU..