Mach R5 Analog 6S w/ RaceCam R1 Micro Camera

Mach R5 Analog 6S w/ RaceCam R1 Micro Camera

$319.99
Product Code: RD10395
Stock In Stock

Available Options

Product Description

In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!
Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.
Quick-swap arm assembly for easy repair on your flying spot or race day.
Enhanced canopy design with low wind resistance for maximum speed and efficiency.

Two versions available:

  • HD version: Caddx Vista Nabula nano
  • Analog version: SucceX mini Force 600mW with RaceCam R1 Micro

FEATURES:

  • Super durable design, 6mm arms and 7075 CNC middle plate
  • Super lightweight but superpower with our newest XING2 2506 motors


HIGHLIGHTS:


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


PRE-TUNED & PRE-SETUP:

-Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

-To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

-Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

-Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

-GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

-Please check our linked article on "GPS Rescue Mode // Setup"


Changelog:

August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19

April 20, 2022: Before SucceX-D Mini F7 TwinG FC changed to BLITZ Mini F7 V1.1 FC.

May, 2022: Before SucceX Mini 50A ESC changed to BLITZ Mini E55 4-IN-1 55A ESC


FRAME // :Mach R5

-Wheelbase: 215mm

-Main body dimension: 152*152mm 

-Arm thickness: 6mm

-Bottom plate thickness: 3mm

-Top plate thickness: 2.5mm

-Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy

-TPU Camera plate

-FC: 30.5*30.5/25.5*25.5mm/20*20mm

-FPV Cam: 14mm /19mm Micro / 20mm


FC // BLITZ Mini F7 V1.1

Top Features:

- BlackBox: 16MB

- DJI Air Unit Plug-and-Play. No need to solder tiny wires.

- BAT, +5V, 3.3, Start indicator

- With LC filter.


Specs:

- MCU:STM32 F722

- Gyro: BMI270

- Baro: DPS310

- Betaflight OSD:IFLIGHT OSD (AT7456E)

- Blackbox:16MB

- 5 X Uarts

- UART1 for VTX HD/Analog

- UART2 for  Receiver

- UART3、UART4 for GPS or 0ther sensors that require a serial port

- UART6 for ESC Telemetry

- 4×Dshot/PWMoutputs 

- 1×I2C    

-1 xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)

- 1 xSH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)

- 1xSH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)

- 1xSH1.0 4Pin  connector GPS (T4/R4/G/5V)

- 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)


- Smartaudio&IRCTramp  VTX protocol supported

- WS2812ledStrip:Yes

- Bepper:Yes

- Firmware: IFRC-IFLIGHT_BLITZ_F722

- Mounting:20*20mm/φ4

- Dimensions:30.5*27mm

- Weight:5.0g

 Product Link


ESC // BLITZ Mini 2-6S E55 4-IN-1 BLHeli32 ESC

Specification:

- Dimension: 35*42mm

- Mounting Holes: 20*20mm/Φ4mm

- Weight: 11.3g

- Supports 2-6S lipo input

- MCU:G071

- Constant: 55 Amps 

- Burst: 60 Amps

- Current sensor: Yes

- BEC: No

- Current rate: 100

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Firmware: BLHeli 32

- Target:   IFLIGHT_BLITZ_G1

 Product Link


VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Specification:

  • Power: PIT/25/200/400mW/600mW
  • Antenna interface: MMCX
  • VTX protocol : IRC Tramp
  • Output 40 channels
  • Size: 29*29mm
  • Mounting pattern: 20*20Φ3/25*25 mmΦ2
  • Weight: 4g


Mach R5 Analog Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Mach R5 Frame
  • 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
  • 1x Sigma RHCP Ipex/UFL 5.8g antenna
  • 2sets x Nazgul R5 3-blades (Set of 4 - Color may vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Write a review

Please login or register to review
-12%
-9%
-10%
-8%
-10%
$1 IFPV Points IFPV Points