-1000x1000.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
The GM8112 motor by iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 6KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specification:
Model No.:GM8112
Weight: 427.7g
Dimension(mm):
RPM:380~420
Torque (g):6000-9000
Voltage (V):22V
Cunnrent (A):0.1
Configuration: 36N42P
Winding Turns:0.19*1-90T
Resistance(Ω): 4.2Ω±5%
Hollow Shaft Diameter (mm):22
AlexMos 32 BIT Extended BGC:
New Capabilities:
*Built-in Frame IMU
*Current sensor to measure battery power consumption
*CAN-bus to replace I2C for the IMU sensor and other periphery connection
*Dedicated 3x SPI/PWM ports for encoder connection
*Additional I2C port to connect 2nd IMU or encoders
*Built-in sound beeper
*Up to 6s LiPo battery is supported
Specifications:
Size of the board 50×50 mm
The distance between the mounting holes 45 mm
The diameter of the mounting holes 3 mm
Power supply voltage 8-26 V (3s-6s LiPo)
Maximum motor current 1,5 A
5V output current to power external devices up to 1 A
3V output current 150 mA
Package included:
- GM8112x 3pcs
- AlexMos 32 BIT Extended BGC x 1