AlexMos 32 BIT Extended BGC with GM4108H-120T Combo Set

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency.

New Capabilities:

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported

Specifications:

Size of the board: 50×50 mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3 mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA

iPower Motor GM4108H-120T Brushless Gimbal Motor

Specification:

Model No.:GM4108

Weight:125.2

Dimension(mm):47*24

RPM: 1089~1025 RPM

Torque (g):1200-1800

Voltage (V):20V

Load Current (A):1.5A

Un-load Current: 0.14±0.1 A

Configuration:24N22P

Winding Turns:0.17*1-120T

Resistance(Ω):11.1Ω±5%

Hollow Shaft Diameter (mm):8

Package included:

- 3 x GM4108H-120T Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x Connecting cables set

NOTE: Slipring will not be compatible with this motors! If need slipring please choose ENCODER version!