AlexMos 32 BIT Extended BGC with GM5208-12 Combo Set

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller featured built-in frame IMU, a current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection.

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported

Specifications:

Size of the board: 50×50 mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA

iPower Motor GBM5208H-200T Brushless Gimbal Motor

The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.

This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.

The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

Specification:

Model No.:GM5208-12

Weight:229.2

Dimension(mm):63*22.7mm

RPM:456~504

Torque (g):1800-2500

Voltage (V):20V

Cunnrent (A):0.09

Configuration: 12N14P

Resistance(Ω):15.2Ω±5%

Hollow Shaft Diameter (mm):12.6mm

Package included:

- 3x iPower GM5208-12 Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x  Connecting cables set

Connecting encoders to the regular SimpleBGC 32bit board