SucceX-D F7 V2.1 TwinG Stack (F7+50A ESC) + DJI Air Unit Bundle

SucceX-D F7 V2.1 TwinG Stack (F7+50A ESC) + DJI Air Unit Bundle

$259.99
Product Code: FC07271
Availability: In Stock
Viewed 7367 times

Available Options

Product Description

The SucceX-D F7 V2.1 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. Designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

Top Features:

• DJI Plug-and-Play - No need to solder tiny wires!

• Gyro Fusion - Zero delay Twin-Gyro filtering!

• Dual BEC 5V and 9V

FC // SucceX-D F7 TwinG

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Baro: YES
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 8S
  • Firmware target:   IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   36*36mm
  • Weight: 7.5g
  • USB type-C

ESC // SucceX 50A 2-6S 4in1

Top Features:

- 8 layers double-sided PCB board

- 3oz 1.4mm thick power board

- 32bit STM32F051 MCU, 48kHz maximum clock speed

- TDK MLCC Low ESR ceramic capacitors

- Top grade NTMFS5C430NL MOSFET

Specification:

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 35A / Burst: 40A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot 
  • Target: iFlight-BL32-4IN1
  • Weight:14.4g
  • Mounting pattern: 30.5*30.5mm/Φ3mm
  • Dimensions43*39mm (including the power pads)

DJI Digital HD FPV Air Unit

Digital HD systems have traditionally been rather bulky and unwieldy to mount on a mini quad. Not anymore. With this air unit, you can comfortably fit the module in your mini quad stack (probably not slammed frames). The 'mini' camera fits easily into your existing builds, no weird mounting adapters.

Note: The Air Unit module does get very hot in use. Do not power on for an extended period of time without proper cooling.

Specifications

Weight:Air Unit (Camera included): 45.8 g,3.9 g (MMCX each)

  • Air Unit: 44 × 37.8 × 14.4 mm
  • Camera: 27.4 × 21.1 × 20.1 mm
  • Operating Frequency: 5.725-5.850 GHz
  • Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
  • Low Latency Mode (720p/120fps): <28 ms
  • High-Quality Mode (720p/60fps): <40 ms
  • Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
  • Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
  • I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
  • Input Power: 7.4-17.6 V, about 4-9 W
  • Lens: 2.1 mm, f/2.1
  • FOV: 150°(D); 122°(H); 93°(V)
  • Weight: 8.2 g

Package Includes

- SucceX-D F7 TwinG Flight Controller × 1

- SucceX 50A 4-in-1 ESC × 1

- DJI FPV Air Unit (with a camera and four M2 screws) × 1

- Three-in-one cable × 1

- Antenna (MMCX) × 2

Write a review

Note: HTML is not translated!
    Bad           Good