Cidora SL5 4S 6S FPV Drone - BNF

Cidora SL5 4S 6S FPV Drone - BNF

$269.99
Product Code: IB07174
Availability: In Stock
Viewed 32197 times

Available Options

Product Description

We are proud to offer a Cidora SL5 4S 6S FPV Drone - BNF with our best iFlight components installed and pre-tuned! SL5 is a 5" size BNF (Bind-and-Fly) quadcopter that comes fully built with everything you need to liftoff!

Different power version (4S, 6S cell count) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio.


Features:

- Full 3K Carbon Fiber airframe

- Easy arm swaps -215mm wheelbase,115g

- Popular Squish X configuration

- SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack


Specifications:

- Total Dimensions: 165*138mm (body dimension)

- Frame Wheelbase: 215mm

- SucceXF7 TwinG Bluetooth FC

- SucceX 50A 2-6s 4-in-1 ESC Dshot1200

- XING CAMO X2306 2450KV (4S )/ XING CAMO X2306 1700KV(6S)

- Caddx.us Ratel 2.1mm FPV cam

- Nazgul 5140 propellers

- Weight: 384.2 (without GoPro TPU mount)


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


SucceX F7 TwinG BT Flight Controller(TwinICM20689)

- MCU:216MHz STM32F722RET6 

- Gyro: 2x ICM20689(SPI) 

- Baro: Yes (Altitude on your OSD)

- Betaflight OSD:YES 

- Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app)

- Blackbox: Onboard 32MB

- 5x Uarts

- 8x Motor outputs

- 8-pin 4in1 ESC port

- 4-pin VTX connector

Betaflight 

-Betaflight 4.1 With RPM Filtering CLI Diff Download here

Older Betaflight:

-Betaflight Firmware:betaflight_4.0.5_STM32F7X2.hex

- Firmware target:IFLIGHT_F722_TWING.config

Physical 

- Mounting hole:30.5*30.5mm,φ4mm with Grommets φ3mm 

-Size:36*36mm 

-Weight:6.2g 


SucceX 50A 2-6S 4-in-1 ESC Dshot1200

- Dimension: 43*39mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Volts input: 2-6S

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

-Telemetry:Supported

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4IN1

- BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file


SucceX the Force 5.8GHz 800mW VTX

- The output power is stable;

- Transmit power 4 gear switch: 25mW/100mW/400mW/800mW;

Output 40 channels. 

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V~36V,+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


Specs:

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage: 7-36V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW

- Channel: 40

size:36*36*3mm

- PIT/25mW/100mW/400mW/800mW


Recommend Parts (Not included):

- TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter

- TPU 3D Printed Camera Mount for GoPro Session


Recommend batteries (not included):

4S 1300mAh to 2000mAh

6s 1050mAh to 1500mAh


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


Package Included:

-1x Cidora SL5 4S 6S FPV Drone - BNF

-2 sets Nazgul 5140 propellers

-1 set LED Lights

NOTE: The Hero 7 camera and TPU print camera mount are not included. 

Write a review

Note: HTML is not translated!
    Bad           Good