SucceX-D F7 V2.1 TwinG Stack (F7+60A ESC) + DJI Air Unit Bundle

SucceX-D F7 V2.1 TwinG Stack (F7+60A ESC) + DJI Air Unit Bundle

$289.99
Product Code: FC07261-7191
Availability: In Stock
Viewed 8173 times

Available Options

Product Description

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.



Features

• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.


FC // SucceX-D F7 TwinG

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Baro: YES
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 8S
  • Firmware Target:   IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   36*36mm
  • Weight: 7.5g
  • USB type-C


ESC // SucceX 60A V2 4in1

Top Features:

- 8 layers single-board stacking PCB board

- 4oz 1.6mm thick power board

- 32bit STM32FO51K MCU, 48kHz maximum clock speed

- TDK MLCC Low ESR ceramic capacitors

- Top grade metal MOSFET


Specification:

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 60A / Burst: 80A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot 
  • Target: iFlight-BL32-4IN1
  • Weight:14.4g
  • Mounting pattern: 30.5*30.5mm/Φ3mm
  • Dimensions43*39mm (including the power pads)

DJI Digital HD FPV Air Unit

Digital HD systems have traditionally been rather bulky and unwieldy to mount on a mini quad. Not anymore. With this air unit, you can comfortably fit the module in your mini quad stack (probably not slammed frames). The 'mini' camera fits easily into your existing builds, no weird mounting adapters.

Note: The Air Unit module does get very hot in use. Do not power on for an extended period of time without proper cooling.


Specifications

Weight:Air Unit (Camera included): 45.8 g,3.9 g (MMCX each)

  • Air Unit: 44 × 37.8 × 14.4 mm
  • Camera: 27.4 × 21.1 × 20.1 mm
  • Operating Frequency: 5.725-5.850 GHz
  • Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
  • Low Latency Mode (720p/120fps): <28 ms
  • High-Quality Mode (720p/60fps): <40 ms
  • Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
  • Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
  • I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
  • Input Power: 7.4-17.6 V, about 4-9 W
  • Lens: 2.1 mm, f/2.1
  • FOV: 150°(D); 122°(H); 93°(V)
  • Weight: 8.2 g

Package Includes

- SucceX-D F7 TwinG Flight Controller (HD Version)

- SucceX 60A V2 4-in-1 ESC  * 1pc

- DJI FPV Air Unit (with a camera and four M2 screws) × 1

- Three-in-one cable × 1

- Antenna (MMCX elbow) × 2




Write a review

Note: HTML is not translated!
    Bad           Good