Grid View:

GBM6208H-150T Gimbal Motor with AS5048A Encoder

Feateures:-The GBM62 series motor by iPower Motors are the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII,MARKIII Cameras.-This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.-The principle of the camera stabilization using brushless direct drive motors In fact,gimb..

$82.90

AlexMos 32 BIT BGC with GM110-10 Gimbal Motor System Combo

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-co..

$599.99

AlexMos 32 BIT BGC with GM110-10 w/Encoder Gimbal Motor System Combo

Encoders in the SimpleBGC projectUsing encoders with SimpleBGC board gives the following advantages:1. Prevents motors from losing synchronization and skipping steps.2. Provides the information about frame angle and angle of the camera relative to the frame, that can beimportant for some kind of applications.3. Can significantly decrease power cons..

$699.99

AlexMos 32 BIT Extended BGC with GM110-10 System Combo

AlexMos 32 BIT Extended BGC New Capabilities:*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other periphery connection*Dedicated 3x SPI/PWM ports for encoder connection*Additional I2C port to connect 2nd IMU or encoders*Built-in sound beeper*Up to 6s LiPo battery is supportedSpe..

$649.99

AlexMos 32 BIT Extended BGC with GM110-10 w/Encoder Gimbal Motor System Combo

Encoders in the SimpleBGC projectUsing encoders with SimpleBGC board gives the following advantages:1. Prevents motors from losing synchronization and skipping steps.2. Provides the information about frame angle and angle of the camera relative to the frame, that can beimportant for some kind of applications.3. Can significantly decrease power cons..

$719.99

AlexMos 32bit BGC Protective case (1set)

Protector Case 32bit alexmos bgc alum case for side pins,top pins compatibleBasic specs:-Weight:2g-compatible with top pins and side pins version-Plug and play,easy and safePackage included:- main board cover x 1- IMU board cover x 2..

$29.99
-10%

GBM2804R Gimbal Motor with AS5048A Encoder and Slipring

Specifications:Model No.:GBM2804RWeight:57gRPM:2149~2375Torque (g):250-350Voltage (V):10VCunnrent (A):0.07Configuration:12N14PWinding Turns:0.19*1-100TResistance(Ω):5.57ΩHollow Shaft Diameter (mm):6.5​AS5048A Encoder Features:360° contactless angle position sensor   Standard SPI or high speed IC interface and PWM  Simple program..

$27.00 $29.99

iPower Gimbal Motor GM110-10 with AS5048A Encoder

The AS5048 is an easy to use 360° angle position sensor with a 14-bit high-resolution output. The maximum system accuracy is 0.05° assuming linearization and averaging is done by the external microcontroller. The IC measures the absolute position of the magnet’s rotation angle and consists of Hall sensors, the analog-digital converter, and digital ..

$209.99

iPower GM2804 Gimbal Motor

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back..

$21.99

iPower Motor GM110-10 Brushless Gimbal Motor

The principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.Special designed for SLR aerial and Z axis DIY Parts Features:-Sealed Case to prevent contamination by dust and dirt.-Hollow shaft for slipring-Configuration: 36N42P ,pr..

$189.99

iPower Motor GM3506 Brushless Gimbal Motor w/ AS5048A Encoder

What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization relies on the principles of inertia (tendency of an object to resist change in its motion) and requires that the camera is well-balanced in t..

$39.90

iPower Motor GM5208-24 Brushless Gimbal Motor

The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on ..

$42.99

iPower Motor GM3506 Brushless Gimbal Motor

The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very s..

$23.99

AlexMos 32 BIT Extended BGC with GM110-8 System Combo

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increasedthe stability which in turn also increases battery efficiency.What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both acti..

$599.90

AlexMos 32 BIT Extended BGC with GM8112 Combo Set

The GM8112 motor by iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 6KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is ver..

$499.90

AlexMos 32 BIT Extended BGC with GM6208 150T Combo Set

SimpleBGC 32-bit Extended Gimbal Controller, it is built-in frame IMU, a current sensor to measure battery power consumption.*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other periphery connection*Dedicated 3x SPI/PWM ports for encoder connection*Additional I2C port to connect..

$319.90
Showing 1 to 16 of 60 (4 Pages)