Grid View:

SucceX F4 V1.1 1S 5A AIO Whoop Board (MPU6000) with VTX

TOP FEATURES:Power supply: 1SSuper light only 5.4gMCU:STM32F411Gyro: MPU6000Support BLHeliSuite programmable5A continuous  currentFC // SucceX-1S Whoop AIO BoardSize:29*29mmMounting pattern: 25.5*25.5mm/φ3mm (half-hole)Connector:Micro-USBWeight: 5.4g (with power cable, vtx, and vtx antenna)MCU:STM32F411Gyro:MPU6000Blackbox:noBEC output:5V..

$36.99

SucceX Mini 40A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC

Features • TDK MLCC Low ESR ceramic capacitors• 48Mhz Runs BLHELI 16.X Firmware• 40A per channel, 50A burst• Supports DShot150/300/600/1200/MultiShot/OneShot etc.• Input: 3-6s LiPoly• Burst: 50 Amps (per channel)• BlHeli32 telemetry: Yes• Mounting Holes: 20*20mm φ3mm with Grommets φ2mm• Firmware:G-H-30 BLS 16.7Package ..

$42.99

SucceX-A F4 40A AIO Board(MPU6000)

The SucceX-A F4 AIO(F4+40A) NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts,4 motor outputs, 8Mb blackbox and a powerful F4 processor to run it all. Designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the AIO FC with the inclu..

$59.99

SucceX-D F7 V2.1 Stack (F7+50A ESC)

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.Features• Universal USB Ty..

$95.99

SucceX-D F7 V2.1 Stack (F7+60A ESC)

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.Features• Universal USB Type C ..

$119.99

SucceX-D F7 V2.1 TwinG Flight Controller (HD Version)

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.Features• Universal USB Ty..

$49.99

SucceX-D F7 V2.1 TwinG Stack (F7+50A ESC) + DJI Air Unit Bundle

The SucceX-D F7 V2.1 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. Designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into th..

$259.99

SucceX-D F7 V2.1 TwinG Stack (F7+60A ESC) + DJI Air Unit Bundle

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.Features• Universal USB Type C ..

$289.99

SucceX-D Mini F7 TwinG Stack (Mini F7+40A ESC)

The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.But the real magic of this..

$79.99

SucceX-E 45A 2-6S BLHeli_S Dshot600 4-in-1 ESC

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC- Dimension: 40*43mm- Mounting Holes: 30.5*30.5mm/Φ3mm- Weight: 14.4g- Supports 2-6S Lipo input- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware- Current sensor: YES- BEC: NO- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.- Target: G-H-30 BLS 16.7Package included:1pc x SucceX-E 45A 2..

$29.99

SucceX 60A Plus V22-6S BLHeli_32 Dshot1200 4-in-1 ESC

The SucceX 60A Plus V2 32bit BL Dshot 1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051  MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.Standard 30.5*30.5 Φ4mm  mounting holes; Vibration and impact ca..

$79.99

SucceX Micro F4 V2.1 15A 2-4S Flight Tower System (MPU6000,ESC Plugs)

SucceX Micro F4 V2.1 Flight Controller-STM32F411-Input voltage 2-4S LIPO-Gyro: MPU6000-2x UART ports-4x motor outputs-Betaflight OSD :AT7456E-Blackbox FLASH: 8MB-BEC 5V 2.5A cont.-Size: 21mm*21mm-Mounting holes distance: 16*16mm-Weight: 2.5g-Firmware: IFLIGHT_F411_PRONOTE: F.PORT protocol RX input support, telemetry not supported. SucceX Micro..

$49.99

Programmable RGB 5 LED lights (4pcs)

The led board has 5 super bright RBG LEDs, which can be installed as RGB LED Tail Light, arms, or other Betaflight LED addressable boards. The LEDs need 5v, ground and a signal source in order to work.The layout of the PCB board keeps wiring clean and neat with a 3 pin plug, it will make it easy to change out in case of a crash. It is pro..

$7.99

SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC

SucceX 50A 2-6S BLHeli_32 Dshot 1200 4-in-1 ESCFeatures:- 8 layers double-sided PCB board;- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;- 32bit FO51K86 MCU, 48mHz maximum clock speed;- TDK MLCC Low ESR ceramic capacitors;- Top grade NTMFS5C430NL MOSFET;- Rational layout, countersunk holes on extended solder pads t..

$49.99

SucceX Micro 15A 2-4S BLheli_S Dshot600 4-in-1 ESC (M3)

SucceX Micro 15A 4-in-1 ESC(w/plug)-Firmware: G-H-30 BLS 16.7 -BLHeliSuite: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file-Input voltage : 2-4S LIPO-Continuous current: 15A-MCU: BB21F16G-BEC: NO-Current sensor: yes-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.-Size: 30mm*22mm-Mounting hole ..

$28.99

SucceX-D 20A Whoop F4 AIO Board (MPU6000)

Top Features:• DJI Plug-and-Play - No need to solder tiny wires!FC // SucceX-D F4 AIOSize:30.5*30.5mmMounting pattern:25.5*25.5mm/φ3mmConnector:Micro-USBMCU:STM32F411Gyro:MPU6000Blackbox:8MBBEC  output: 5V 2AINA pad:nR2Barometer:noConstant current:20A,25A(Burst)Input:2-4SCurrent sensor:yesBLHeli:BLHeli-SESC Telemetry:noFirmware Target:IFLIGHT_..

$49.99
Showing 1 to 16 of 27 (2 Pages)