iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-4S.
Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello!
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
- Ultra-light but high performance
- JELLOFREE durable carbon/plastic construction
- No props or prop guards in view
- Upgradeable, versatile, futureproof
PRE-TUNED & PRE-SETUP:
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16x16 Tower 2-4S
- iFlight 1103 motors (1.5mm shaft)
- Caddx Baby Turtle HD FPV cam
- Gemfan 1635 40mm 3/4 blade OR HQ 1.6x1.6x4
- iFlight Prop Guards 40mm
SucceX Mirco F4 Flight Tower System 16x16mm
SucceX F4 Flight Controller
-Input voltage 2-4S LIPO
-2x UART ports
-4x motor outputs
-No Blackbox FLASH
-BEC 5V 2A cont.
-Mounting holes: 16*16
-BF target : IFLIGHT_F411_PRO
SucceX Mirco 12A Brushless ESC
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Mounting hole 16*16mm
SucceX Mirco VTX
-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Mounting holes: 16*16mm
Motor kV Variants:
-We offer several motor setups to fit your desired performance, equipment or just preference.
-(2S), (3S) will be available.
SD card insert and ejection:
-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.
VTX control implementation:
-VTX can be conveniently set up in your OSD.
-Gemfan for general use, durable prop, crash resistant!
-HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant!
Receivers available currently:
1 x CineBee 75HD
1 set Gemfan 40mm props
1 set HQ micro whoop props
Warm tips: Grasp bell before removing props to avoid damage.