Raze Whoop AIO F4 for Alpha A75
FC // Raze Whoop AIO F4Size:30.5*30.5mmMounting pattern:25.5*25.5mm/φ3mmWeight: 7.4gConnector:Micro-USBMCU:STM32F411Gyro:MPU6000Blackbox:8MBBEC output: 5V 2AINA pad:nR2Barometer:BMP280Constant current:20A,25A(Burst)Input:2-4SCurrent sensor:yesBLHeli:BLHeli-SESC Telemetry:noFirmware Target:IFLIGHT_F411_PROESC Firmware:Q-H-15Package Includ..
SucceX-D Mini F7 V2 2-6S TwinG FC (ICM20689) -φ4 Mounting
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.But the real magic of this..
SucceX F4 V2 1S 5A AIO Whoop Board with Built-in D8 Receiver
TOP FEATURES:Power supply: 1SSuper light only 4.8gMCU:STM32F411Gyro: MPU6000Support BLHeliSuite programmable5A continuous currentBuilt-in VTXBuilt-in D8 ReceiverFC // SucceX-1S Whoop AIO BoardSize:29*29mmMounting pattern: 25.5*25.5mm/φ3mm (half-hole)Connector:Micro-USBWeight: 4.8g (with power cable, VTX, and VTX antenna)MCU:STM32F41..
Whoop AIO F4 V1.1 AIO Board (BMI270)
FC // Whoop AIO F4 V1.1 AIOSize:30.5*30.5mmMounting pattern:25.5*25.5mm/φ3mmWeight: 7.4gConnector:Micro-USBMCU:STM32F411Gyro:BMI270Blackbox:8MBBEC output: 5V 2AINA pad:nR2Barometer:noConstant current:20A,25A(Burst)Input:2-4SCurrent sensor:yesBLHeli:BLHeli-SESC Telemetry:noFirmware Target:IFLIGHT_F411_PROESC Firmware:Q-H-15Package Include..
SucceX-D 20A Whoop V3.2 F4 AIO Board (MPU6000) for ProTek25
Top Features:• DJI Plug-and-Play - No need to solder tiny wires!FC // SucceX-D F4 AIOSize:30.5*30.5mmMounting pattern:25.5*25.5mm/φ3mmConnector:Micro-USBMCU:STM32F411Gyro:MPU6000Blackbox:16MBBEC output: 5V 2AINA pad:nR2Barometer:noConstant current:20A,25A(Burst)Input:2-4SCurrent sensor:yesBLHeli:BLHeli-SESC Telemetry:noFirmware Target:IFLIGHT..
SucceX-E F7 2-6S Flight Controller
FC // SucceX-E F7Top Features:- Gold-plated plug- BlackBox: 16MB- Vista HD Plug-and-Play. No need to solder tiny wires.- BAT, +5V, 3.3, Start indicator- Smartaudio & IRC Tramp VTX protocol supported Changelog:Due to some global supply issues, and Flash component was updated as well as some circuit improvements implemented.Be..
SucceX-E Mini F7 2-6S Flight Controller
FC // SucceX-E Mini F7Top Features:- Gold-plated plug- BlackBox: 16MB- Vista HD Plug-and-Play. No need to solder tiny wires.- BAT, +5V, 3.3, Start indicator- Smartaudio & IRC Tramp VTX protocol supportedChangelog:Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements i..
SucceX F4 V1.1 1S 5A AIO Whoop Board with Built-in D8 Receiver
TOP FEATURES:Power supply: 1SSuper light only 4.8gMCU:STM32F411Gyro: MPU6000Support BLHeliSuite programmable5A continuous currentBuilt-in VTXFC // SucceX-1S Whoop AIO BoardSize: 29*29mmMounting pattern: 25.5*25.5mm/φ3mm (half-hole)Connector:Micro-USBWeight: 4.8g (with power cable, VTX, and VTX antenna)MCU:STM32F411Gyro:MPU6000B..
SucceX Micro F4 V2.1 15A 2-4S Flight Tower System (MPU6000,ESC Plugs)
SucceX Micro F4 V2.1 Flight Controller-STM32F411-Input voltage 2-4S LIPO-Gyro: MPU6000-2x UART ports-4x motor outputs-Betaflight OSD :AT7456E-Blackbox FLASH: 8MB-BEC 5V 2.5A cont.-Size: 21mm*21mm-Mounting holes distance: 16*16mm-Weight: 2.5g-Firmware: IFLIGHT_F411_PRONOTE: F.PORT protocol RX input support, telemetry not supported. SucceX Micro..
SucceX-D F7 V2.2 TwinG Flight Controller (HD Version)
The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.Features• Universal USB Ty..
SucceX-D Mini F7 2-6S TwinG FC (ICM20689)
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.But the real magic of this..
SucceX-E F4 V2.2 Flight Controller (MPU6000)
Specs:- MCU:STM32F405- Gyro:MPU6000- Baro: NO- Betaflight OSD:IFLIGHT OSD (AT7456E)- Blackbox:16MB(W25Q128)- 4X Uarts- UART1 VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/Analog Telemetry- UART2 Receiver- UART4 Vacancy- UART6 ESC Telemetry- 1×12C- 1×SH1.0 10pin connector for ESC(GND/GND/BAT/BAT/M1/M2/M3/M4/CUR/R6)- 1 x SH1..