iFlight-Where dreams can fly

iFlight-Where dreams can fly

Control System Kits

Grid View:

AlexMos 32 BIT BGC with GM110-10 Gimbal Motor System Combo

(0)

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-co..

$615.99

AlexMos 32 BIT BGC with GM110-10 w/Encoder Gimbal Motor System Combo

(0)

Encoders in the SimpleBGC projectUsing encoders with SimpleBGC board gives the following advantages:1. Prevents motors from losing synchronization and skipping steps.2. Provides the information about frame angle and angle of the camera relative to the frame, that can beimportant for some kind of applications.3. Can significantly decrease power cons..

$721.99

AlexMos 32 BIT Extended BGC with GM110-10 System Combo

(0)

AlexMos 32 BIT Extended BGC New Capabilities:*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other periphery connection*Dedicated 3x SPI/PWM ports for encoder connection*Additional I2C port to connect 2nd IMU or encoders*Built-in sound beeper*Up to 6s LiPo battery is supportedSpe..

$665.99

AlexMos 32 BIT Extended BGC with GM110-10 w/Encoder Gimbal Motor System Combo

(0)

Encoders in the SimpleBGC projectUsing encoders with SimpleBGC board gives the following advantages:1. Prevents motors from losing synchronization and skipping steps.2. Provides the information about frame angle and angle of the camera relative to the frame, that can beimportant for some kind of applications.3. Can significantly decrease power cons..

$741.99

AlexMos 32 BIT Extended BGC with GM110-8 System Combo

(5)

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increasedthe stability which in turn also increases battery efficiency.What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both acti..

$615.99

AlexMos 32 BIT Extended BGC with GM8112 Combo Set

(0)

The GM8112 motor by iPower Motors is the ultimate brushless gimbal motor for Red Epic / Large Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 6KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is ver..

$515.99

AlexMos 32 BIT BGC with GM3506 Encoder System Combo Set

(0)

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency.What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both active ..

$301.99

AlexMos 32BIT Extended BGC with GM3506 Encoder System Combo Set

(0)

Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency.What's encoder technology in brushless gimbal control system?The 3 axis stabilization gimbal system that relies on both active ..

$321.99

AlexMos 32 BIT BGC with GM3506 Combo Set

(0)

The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-co..

$195.99

AlexMos 32 BIT Extended BGC with GM3506 Combo Set

(0)

The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very s..

$245.99

AlexMos 32 BIT Extended BGC with GM6208 150T Combo Set

(0)

SimpleBGC 32-bit Extended Gimbal Controller, it is built-in frame IMU, a current sensor to measure battery power consumption.*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other periphery connection*Dedicated 3x SPI/PWM ports for encoder connection*Additional I2C port to connect..

$335.99

AlexMos 32 BIT Extended BGC with GM5208-12 Combo Set

(0)

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller featured built-in frame IMU, a current sensor to measure battery power consumption, CAN-bus to replace I2C for the IMU sensor and other periphery connection.*Built-in Frame IMU*Current sensor to measure battery power consumption*CAN-bus to replace I2C for the IMU sensor and other ..

$285.99
Showing 1 to 12 of 33 (3 Pages)
IFPV Points IFPV Points