Nazgul5 HD 6S w/ Walksnail Avatar HD FPV Goggles - ELRS RTF

Nazgul5 HD 6S w/ Walksnail Avatar HD FPV Goggles - ELRS RTF

$1,257.99 $1,287.99 -2%
Product Code: F013136
Stock Pre-Order

Available Options

Product Description


Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


Nazgul5(XL5 V5) frame specs:


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"



FC // BLITZ F7 Flight Controller V1.1 (SKU: BF12083)

  • MCU: STM32 F722
  • Gyro: BMI270
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • Flash: 32MB (Blackbox flash)
  • UARTS: 6
  • Motor outputs: 4x (SH1.0 connector)
  • I2C serial: SDA / SLA pads
  • Smartaudio / IRC Tramp VTX protocol supported
  • LED controller: Yes
  • Beeper pad: Yes
  • Firmware target: IFRC-IFLIGHT_BLITZ_F722
  • Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
  • Dimensions: 36.5*35 mm
  • Weight: 7.8g


ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC

- Supports: DShot150/300/600/MultiShot/ OneShot etc.

- Mounting Holes: 30.5*30.5mm/Φ4mm

- Supports 2-6S lipo input

- Telemetry Output: NO

- Target: Q-H-25 16.7

- Current sensor: Yes

- Constant: 45 Amps 

- Current rate: 200

- Burst: 55 Amps

- Weight: 14.7g

- MCU: BB21

- BEC: NO


Commando8 Specification:

ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)

- 915MHz system: SX1276

- 2.4GHz system: SX1280

BASE 2.4G Module:

- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8

- 2.4GHz system: CC2500

Antenna options:

- Dual-Band (915MHz+2.4GHz)

- Single-Band (915MHz)

- Single-Band (2.4GHz)

Control interface:

- 2x 2-position switches (can be used for arming; not momentary)

- 2x 5-axis menu buttons for full OpenTX or EdgeTX control

- 2x 3-position switches


RF Power: 

- ExpressLRS 915MHz // Max Output 1000mW

- ExpressLRS 2.4GHz // Max Output 500mW

- Input: Mini High Precision Hall Gimbals with NMB bearings

- Battery: Built-in 4000mAh 1S2P 18650 Battery

- Charging: Type-C 20W Quick Charge

- Charging Connector: Type-C

- Radio Channels: 8

- Weight: 310g


Walksnail Avatar Digital HD FPV Goggles Specification:

OPTIC ENGINE

- Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)

- Adjustable Focus Range: +2 to -6 diopter

- Field of View (FOV): 46°


MICRO DISPLAYS

- Full HD 1080p OLED Dual Micro Displays


INPUT VOLTAGE

- 7-21V (2S-5S)


FEATURES

- Customizable Fit with Optional Faceplate Pad Accessories

- HD Video Output via USB-C Connector

- Supports Betaflight Canvas Mode

- Adjustable Anti-Fog Ventilation

- On/Off Power Button

- Integrated HD DVR




BNF // Parts lists

  • 1x Prebuilt and tested Quadcopter
  • 1x Walksnail Avatar Digital HD FPV Goggles
  • 1x Nazgul5(XL5 V5) Frame
  • 1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
  • 2x Crystal LHCP Short Omni Antennas
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.


  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 
  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.



Note:

All iFlight BNFs are tested before shipment to guarantee highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support

Write a review

Please login or register to review
-12%
-9%
-10%
-8%
-10%
$1 IFPV Points IFPV Points