Nazgul Evoque F6 6S Analog FPV Drone- BNF

Nazgul Evoque F6 6S Analog FPV Drone- BNF

$340.99
Product Code: F011805
Stock In Stock

Available Options

Product Description

Please note that the shipment time for installing GPS needs to be postponed by 3-5 working days!



The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels - Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well.. These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller. 

Secured Integrated XT60 Battery Plug - As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics - F7 55A Power Stack

Our BLITZ Mini F7 flight control, modern USB type-C plug, 16MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new BLITZ Mini E55S 4-IN-1 ESC packed with high performance Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise besides a pre-installed capacitor on the battery lead.

XING2 Performance Motors 

Aluminum unibell, 5mm steel alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. 

Illumination - Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night's race.

SucceX Force 600mW - Analog Reliable Power

Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn't hop off in wild crashes.


Changelog:

March 2022:  Before XING2 2506 1500KV motors changed to XING2 2506 1500KV motors(Black color)


Specifications:

Total Dimensions: 255.4mm (Squashed X) / 262.6mm (DeadCat)

- Geometry: Squashed-X or DC (DeadCat) frame available

- Bottom to top distance: 28mm

- Arm Thickness: 6mm

- Bottom plate thickness: 2.5mm

- Top plate thickness: 2mm

- Upper(middle) plate thickness: 3mm

- FC // BLITZ Mini F7 (LINK)

- ESC // BLITZ E55S Mini 4-in-1 (LINK)

XING2 2506 1650KV motors  (LINK)

- HQ 6X2.5X3 Tri-blade Props

- Weight: 392.6g (without battery and GoPro mount)


FC // BLITZ MINI F7 (LINK)

  • Top Features:

    - IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!

    - DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)

    - FC INDICATOR LEDS FOR VISUAL DEBUGGING



    Specs:

    MCU:   STM32 F722

    GYRO:   BMI270

    BAROMETER:   DPS310

    OSD CHIP:   AT7456

    FLASH:   16MB (BLACKBOX FLASH)

    UARTS:   6

    MOTOR OUTPUTS:   4X (SH1.0 CONNECTOR)

    I2C SERIAL:   SDA / SLA PADS

    SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED

    LED CONTROLLER:   YES

    BEEPER PAD:   YES

    FIRMWARE TARGET:   IFRC-IFLIGHT_BLITZ_F722

    MOUNT PATTERN:   20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS

    DIMENSIONS:   30.5X27 MM

    WEIGHT:   5G


    WIRING SUGGESTION:

    - UART 1 FOR VTX HD / ANALOG

    - UART 2 FOR A RECEIVER

    - UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT

    - UART 6 FOR ESC TELEMETRY


    TIPS

    1. F722 MCU HAS AN INNER INVERTER.

    2. SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2

    3. FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1

    4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2


ESC // BLITZ Mini E55 4-IN-1 (LINK)

- Input: 2-6s LiPo

- Constant: 55 Amps (per channel)

- MCU: BB21

- Burst: 60 Amps (per channel)

- BEC: No

- BlHeli32 telemetry: Yes

- Dimensions: 42*35mm 

- Mounting Holes: 20*20mm φ3mm with Grommets φ2mm

-  Weight: 11.3g 

- Target: QH-50 16.7


VTX // 5.8GHz SucceX Mini Force 600mW VTX (LINK)

- Power: PIT/25/200/400mW/600mW

- Antenna Interface: MMCX

- VTX protocol: IRC Tramp

- Output:  40 channels


Package included:

- 1 x Nazgul Evoque F6 Analog (Squashed X or DeadCat Pattern)

- 4 x HQ 6X2.5X3 Tri-blade Propellers 

- 2 sets of Battery pads

- 1 x Battery straps

- 1 Screw bag

Write a review

Please login or register to review
$1 IFPV Points IFPV Points