This Nazgul Evoque F5 6S HD is a 5" RTF/ BNF (Bind-and-Fly) quadcopter that comes with the Runcam Link Wasp Digital
HD System, and Nazgul 5" 3-Blade propellers. The Nazgul Evoque F5 6S HD has been pre-tuned and set up with
everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING 2207 6S
1800KV motors, mini BLITZ F7 Flight Controller, and the mini BLITZ E55 55A 2-6S BLHeli32 4-in-1 ESC, which make this
quad a must-have!
THE SECRET OF ULTIMATE PERFORMANCE IS PASSION
That was iFlight's slogan for their newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics to be offered. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.
LIGHTWEIGHT SIDE PANELS - KEEP YOUR RIG CLEAN
Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well... These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.
SECURED INTEGRATED XT60 BATTERY PLUG - AS AS IT CAN BE
Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and iFlight has found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.
ILLUMINATION - LET IT BE GREEN
360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and give you some style at the next night's race.
Product Name：Nazgul Evoque F5 6S HD
FC: BLITZ Mini F722
ESC: BLITZ Mini E55 55A 4-IN-1 ESC
Video Transmission: Runcam Link Wasp
Frame: 255mm wheelbase
Motor: XING2 2207 motors
Prop: Nazgul 5 inch propellers
Takeoff Weight：Approx. 650 g
Dimensions (L×W×H)：180×180×80 mm
Max Speed：130 Km/h (Manual Mode)
Maximum Takeoff Altitude：5000 m
Max Hover Time：Approx. 8 mins
Max Flight Distance：5 km
Max Wind Speed Resistance：130 Km/H (Level 4)
Operating Temperature Range：-10° to 40° C (14° to 104° F)
Antennas: 1 Antenna
Product Name: RUNCAM LINK Wasp
FPV Cam :RunCam Wasp
Runcam Link: L19mm*W19mm*H19mm
FPV Cam: L29mm * W29mm * H13mm
Communication Frequency: 5.725-5.85GHz
Transmission Power (EIRP): FCC/SRRC/MIC: <20dBm; CE: <14dBm
Input Volts：14-26.4 V
Weight: 23.5 g
Image Sensor: 1/3.2”
Resolution: [email protected]
LENS： FOV D:155° H:125° V:96°
Coaxial Cable: 120 mm
Product Name：DJI FPV Goggles V2
Weight：Approx. 290 grams（headband included）
Dimensions (L×W×H)：L167 * W1039 * H 813mm
Screen Size (single screen)：0.49-inch
Resolution (single screen)： 1920×1080
Refresh Rate： Up to 100 Hz
Interpupillary Distance Range：56-72 mm
Diopter Adjustment Range：-8.0 D to +2.0 D
FOV (single screen)：51°
Communication Frequency：2.400-2.4835 GHz；5.725-5.850 GHz
Transmission Power (EIRP)：
2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)
5.8 GHz : < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)
Max Video Transmission Bitrate ：50 Mbps
Operating Temperature Range：0° to 40° C (32° to 104° F)
Power Input：7-9 V (1.5 A)
1 x Nazgul Evoque F5 6S HD BNF
1 x DJI FPV Goggles V2
2 x Antennas
2 x Battery pads
2 x Prop(Pairs)
Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"