Nazgul Evoque F5 4S/6S w/Nebula Pro Vista HD System - ELRS RTF

Nazgul Evoque F5 4S/6S w/Nebula Pro Vista HD System - ELRS RTF

$949.99 $1,049.99 -10%
Product Code: F012380
Stock In Stock

Available Options

Product Description


Please note that the shipment time for installing GPS needs to be postponed by 3-5 working days!




The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels - Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well... These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller. 

Secured Integrated XT60 Battery Plug - As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics - F7 55A Power Stack

Our BLITZ Mini F7 TwinG flight control with Gyro Fusion technology, modern USB type-C plug, 32MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new BLITZ Mini 55A ESC packed with better heat-dissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the pre-soldered directly installed Capacitor right next to your battery leads.

XING2 Performance Motors - The Best Motors Just Got Better

7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights. 

Illumination - Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night's race.

Digital HD Experience - Nebula Pro Vista

Equipped with the Nebula Pro Vista FPV system feed on your DJI FPV Goggles and range you've never expected with your old analog VTX. 


Changelog:

August 2021: The color of 915 antenna mount changed from green to black, change the foam inner packaging to blister material.

August 2021: Before two antennas changed to one.

October 23, 2021: Before Polar Caddx Vista changed to DJI Camera Vista.

October 2021: Before SucceX-E mini F7 Stack(F7+45AESC) changed to BLITZ MINI (F7+BLITZ E55 4-in-1 ESC)

February 2022: Before BLITZ MINI F7 V1(MPU6000) changed to BLITZ MINI F7 V1.1 (BMI270

July 2022: Before DJI Camera Vista HD System changed to Nebula Pro Vista HD System



Specifications:

- Geometry: Squashed-X or DC (DeadCat) frame available

- Weight: 412g (without battery and GoPro mount)

- Total Dimensions: 136*190mm (body dimension)

- Upper(middle) plate thickness: 3mm

- XING2 2207 motors (4S/6S) (LINK)

- Bottom to top distance: 28mm

- Bottom plate thickness: 3mm

- Top plate thickness: 3mm

- Arm Thickness: 6mm

- Nazgul F5 propellers


FC // BLITZ MINI F7 V1.1 (LINK) (SKU: BF12000)

Top Features:

- DJI Air Unit Plug-and-Play. No need to solder tiny wires.

- BAT, +5V, 3.3, Start indicator

- BlackBox: 16MB

- With LC filter.


Specs:

- Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

- Smartaudio / IRC Tramp VTX protocol supported

- Firmware target: IFRC-IFLIGHT_BLITZ_F722

- Motor outputs: 4x (SH1.0 connector)

- Flash: 16MB (Blackbox flash)

- Dimensions: 30.5x27 mm

- I2C serial: SDA / SLA pads

- MCU: STM32 F722

- Barometer: DPS310

- LED controller: Yes

- OSD Chip: AT7456

- Beeper pad: Yes

- Gyro: BMI270

- Weight: 5g

- UARTS: 6


Tips

1. F722 MCU has an inner inverter.

2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX,we suggest you connect to Uart_RX2

3. Frsky SmartPort,Tramp & Smartaudio can be connected to any unused UART_TX,we suggest you connect to Uart_TX1

4. F.port can be connected to any unused UART_TX,we suggest you connect to Uart_TX2



ESC // BLITZ Mini 55A  (LINK)

Specification:

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Mounting Holes: 20*20mm/Φ4mm

- Target:   IFLIGHT_BLITZ_G2

- Supports 2-6S lipo input

- Dimension: 35*42mm

Firmware: BLHeli 32

- Constant: 55 Amps 

- Current sensor: Yes

- Current rate: 100

- Weight: 11.3g

- Burst: 60 Amps

- MCU:G071

- BEC: No


Commando8 Specification:

ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)

- 915MHz system: SX1276

- 2.4GHz system: SX1280

BASE 2.4G Module:

- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8

- 2.4GHz system: CC2500

Antenna options:

- Dual-Band (915MHz+2.4GHz)

- Single-Band (915MHz)

- Single-Band (2.4GHz)

Control interface:

- 2x 2-position switches (can be used for arming; not momentary)

- 2x 5-axis menu buttons for full OpenTX or EdgeTX control

- 2x 3-position switches


RF Power: 

- BASE 2.4GHz Multiprotocol // Max Output 100mW

- ExpressLRS 915MHz // Max Output 1000mW

- ExpressLRS 2.4GHz // Max Output 500mW

- Input: Mini High Precision Hall Gimbals with NMB bearings

- Battery: Built-in 4000mAh 1S2P 18650 Battery

- Charging: Type-C 20W Quick Charge

- Charging Connector: Type-C

- Radio Channels: 8

- Weight: 310g


Nazgul Evoque F5 HD RTF Included Components and Parts


- 1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)

- 1 x Nazgul Evoque F5(Squashed X or Deadcat pattern)

- 1 x Albatross LHCP 5.8GHz SMA FPV Antenna

- 1 x iFlight Lipo Strap 20*250mm (Black)

- 1 x iFlight Lipo Strap 15*250mm (Black)

1 x DJI HD FPV Goggles V2

- 4 x Nazgul F5 Prop



Note:

All iFlight BNFs are tested before shipment to guarantee highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support

Write a review

Please login or register to review
-12%
-9%
-10%
-8%
-10%
$1 IFPV Points IFPV Points